行业技术领先的反向工程专家
为你提供专业的反向技术方案

当前位置:力思PCB抄板工作室 >> 芯片解密 >> S9S08AW16ACFT-深圳MOTOROLA系列芯片解密

S9S08AW16ACFT-深圳MOTOROLA系列芯片解密

时间:10-07-08 点击:

  S9S08AW16ACFT  Features:
  8-Bit HCS08 Central Processor Unit (CPU)
  40-MHz HCS08 CPU (central processor unit)
  20-MHz internal bus frequency
  HC08 instruction set with added BGND
  instruction
  Background debugging system
  Breakpoint capability to allow single breakpoint
  setting during in-circuit debugging (plus two
  more breakpoints in on-chip debug module)
  Debug module containing two comparators and
  nine trigger modes. Eight deep FIFO for storing
  change-of-flow addresses and event-only data.
  Debug module supports both tag and force
  breakpoints.
  Support for up to 32 interrupt/reset sources
  Memory Options
  Up to 16 KB of on-chip in-circuit programmable
  FLASH memory with block protection and
  security options
  Up to 1 KB of on-chip RAM
  Clock Source Options
  Clock source options include crystal, resonator,
  external clock, or internally generated clock
  with precision NVM trimming
  System Protection
  Optional computer operating properly (COP)
  reset with option to run from independent
  internal clock source or bus clock
  Low-voltage detection with reset or interrupt
  Illegal opcode detection with reset
  Illegal address detection with reset
  Power-Saving Modes
  Wait plus two stops
  Peripherals
  ADC — 8-channel, 10-bit analog-to-digital
  converter with automatic compare function
  SCI — Two serial communications interface
  modules with optional 13-bit break
  SPI — Serial peripheral interface module
  IIC — Inter-integrated circuit bus module to
  operate at up to 100 kbps with maximum bus
  loading; capable of higher baud rates with
  reduced loading
  Timers — Three1 16-bit timer/pulse-width
  modulator (TPM) modules — Two1 2-channel
  and one 4-channel; each has selectable input
  capture, output compare, and edge-aligned
  PWM capability on each channel. Each timer
  module may be configured for buffered,
  centered PWM (CPWM) on all channels
  KBI — 7-pin keyboard interrupt module
  Input/Output
  Up to 38 general-purpose input/output (I/O)
  pins
  Software selectable pullups on ports when
  used as inputs
  Software selectable slew rate control on ports
  when used as outputs
  Software selectable drive strength on ports
  when used as outputs
  Master reset pin and power-on reset (POR)
  Internal pullup on RESET, IRQ, and BKGD/MS
  pins to reduce customer system cost
  Package Options
  48-pin quad flat no-lead package (QFN)
  44-pin low-profile quad flat package (LQFP)
  42-pin shrink dual-in-line package (SDIP)
  32-pin low-profile quad flat package (LQFP)

        提供MOTOROLA S9S08AW16ACFT单片机解密服务,仅限学习、研究等合法用途。
  咨询QQ:496581979
  联系电话:0755-83035820,83035862
  Emai:
corepcb@126.com

  关键词:S9S08AW16ACFT破解